ZR53

Nasiol ZR53 is a paint protection product applied on the exterior surfaces of motor vehicles. This product, also known as Nano Ceramic coating, enables the surface to become resistant to scratches, provides water and oil repellency and provides easy cleaning of challenging stains such as bird droppings and road salt residue. It protects the color of the vehicle paint by providing UV protection, and with minimal care ZR53 can provide 3 years of protection.

ZR53 is safe to be applied on plastic, metal, painted metal surfaces.

Approximate consumption values according to passenger vehicle classes are as follows:

Small Vehicle: 30-35 ml (A-B class)
Standard Size Vehicle: 35-40 ml (C-D class)
Large Vehicles: 40-50 ml (E-SUV class)

Please remember to read the product instruction booklet and watch the ZR53 application video before beginning the process.
Nasiol ZR53 is a nano paint protection product developed to be applied by both professional and novice end users, and its application time is in the range of 60-90 minutes for standard passenger cars. Please remember that this time range is only for the ZR53 application and does not include the time potentially spent on scratch removal. The product applied incorrectly without paying attention to the application instructions can only be taken from the surface by a scratch removing compound or sanding.
In order to obtain maximum efficiency from the product, the ideal conditions (temperature + 5˚C to + 30˚C, humidity 50%) should be within the specified range.
The surface where the ZR53 is to be applied should not be extremely cold or hot. Do not apply the product under direct sunlight. Prior to ZR53 treatment, clean the surface and remove imperfections with a clay bar. After cleaning the vehicle surface, if the surface requires it use a compound like Nasiol’s silicone-free compound of Clearub 305 to remove the scratches prior to ceramic coating treatment. Once the scratch removal process is completed, wash and dry the surface one more time. To remove the excess water from hard to reach places, it is recommended to use an air gun to dry out the vehicle and please be sure that the surface is completely dried. Clean the remaining residues such as compound dust with the help of a clean and lint-free micro fiber and make it ready for ZR53 application with Nasiol Clean – a solution designed for pre-ceramic coating treatment cleaning.. Partition the surface of the vehicle to be applied with a masking tape and make sure that it does not leave any residue. The partition should be around 1m2 (10 sqft) If the temperature and humidity values of the application environment are above + 30C and 50%, it will be more beneficial to work in smaller areas as the product curing time will shorten..
Wear the included protective nitrile gloves before using ZR53. Gently shake the product bottle few times before using. With the application pad placed on top of the open ZR53 bottle, turn the bottle upside down so the product solution adheres to the pad. Repeat this process for about 4-5 times and remember to repeat this process for each divided section.
Apply the product to the surface with linear movements in horizontal and vertical axes without excessive pressure. After the application to the surface, when the product starts to collect / bubble (normally about 30 seconds) wipe the surface with the included cloth in a circular motion without applying too much pressure. Make sure to pay attention to the bubbling process. In about 30 seconds the formula will begin to settle and it may become very difficult to wipe off after it cures. If this instance takes place, the product application should be repeated by applying polishing with a 2000 grit sandpaper to the relevant surface. To get the most out of the cloths, it is recommended to fold it in four section. As the product remaining on the previously used parts of the cloths will cure and harden, use the same part, making sure that there is no crystallization in more than 2 parts. After wiping with the first cloth, use the long feathered microfiber cloth to complete the final polishing process with circular movements without applying too much pressure. Wiping and polishing with a cloth will increase the efficiency of the coating. Make sure that there are no parts that were not applied or skipped between sections.
After the application process is completed, coated surfaces should be protected from contact with water, dirt, direct sunlight and chemicals for 24 hours.
Full protection against abrasion and detergents is gained after 48 hours. Therefore, the coated surface should not be washed during the first 48 hours.
A single layer of product application is sufficient for durability. Approximate consumption values according to passenger vehicle classes are as follows:
Small Vehicle: 30-35 ml (A-B class)
Standard Size Vehicle: 35-40 ml (C-D class)
Large Vehicles: 40-50 ml (E-SUV class)

Before applying the product, make sure that the vehicle is clean and dry. Make sure to apply the product in a shadow area.

Scratch resistance
Water and oil repellency
UV protection
Chemicals resistance
Easy to clean
Protection against bird droppings and all other environmental influences

Provides durability up to 3 years with minimal maintenance.

The product applied incorrectly can only be taken from the surface by wax or sanding process. Using a compound like Nasiol’s Clearub 305 or 505 will assist you in removing the previous mistakes done during application.

You can buy ZR53 from our online store nasiol.in/shop/

It should definitely not be eaten. We have toxicity certificates and MSDS documents showing that our products are harmless to human health and the environment. You can view these documents by contacting our sales team. However, do not eat the product regardless and seek medical help if someone has eaten the product.

Our retail and wholesale prices are different from each other. Ekspermarket.com is our shopping site where you can see the retail prices. Please contact our sales team for our wholesale prices.

You can easily do the application by yourself and by following instructions on our application video.

ZR53 product is applied in one coat and there is no need for a second coat.

It extends the paint life of the vehicle, provides protection against fine scratches, provides easy cleaning of the vehicle from stains that are difficult to remove such as bird droppings and thanks to its water and oil repellent properties, protects the vehicle surface against sun rays, acid rain, and harmful effects of chemicals.

In the product instructions, it is written that the product should not be used before 3 months on newly painted surfaces. The reason for this is that the bonding performance of the product to the well-dried paint is much higher. When the paint does not dry completely, it does not show a fully resistant (stable) surface behavior to which our coatings will bond. For full performance, 3-4 months should pass after painting.

Nasiol ZR53 50 ml contains enough product for 1 vehicle.

It has REACH certificate, LFGB certificate and ISO certificate, Volkswagen TL211 (resistance to various hazardous chemical components) certificate.

No. Please do not apply ZR53 on PPF.

You can benefit from our special branding study for the unboxed Nasiol ZR53, and create your own brand by choosing from our catalog we have created for this purpose.

With suitable spray bottles, yes, industrial type, solvent resistant, flow regulated bottles can be used. Air spray bottles should be preferred instead of air guns.

Unfortunately no. The warranty or agreement can only be given by the applicator, depending on the fact that we only supply the product and the application part is the main point in achieving the desired durability and effect.

The only way to clean the incorrectly applied ZR53 is through wet blasting of 2000.

This may be due to the accumulation of minerals in the water droplets. Some types of hard water can cause this situation. It is recommended to protect the surface from such hard water types for one month after new applications.

Nasiol MF2 and Nasiol ZR53 are both paint protective products for vehicles such as cars and yachts. Nasiol MF2 is less durable than Nasiol ZR53, its durability on the surface is up to 1 year and it has no resistance to surface scratches, but Nasiol ZR53 lasts up to 3 years and is resistant to surface scratches. However, MF2 is much easier to apply with its unique spray method. The other advantage of MF2 is its price, compared with ZR53, MF2 is inexpensive and it can be used as refresher on a vehicle that has been protected with ZR53 and NL272. Finally, MF2 can be applied on Nasiol ZR53 as a second layer to increase the strength and brightness.

Nasiol NL272 and Nasiol ZR53 are both paint protective products for motor vehicles. Nasiol ZR53 provides strength up to 3 years, while Nasiol NL272 provides strength up to 5 years.

Nasiol ZR53 has a completely different synthesis and production method, which makes Nasiol ZR53 a leader in efficiency and strength. This provides more resistance to scratches than other coatings, the protection coverage is better than others.

The unopened bottle can be stored for 1 year under suitable storage conditions.

The product that is not completely finished after opening the bottle; It should be consumed within 1 week by making sure that the opening is tightly closed. The unopened bottle can be stored for 1 year under suitable storage conditions.

Our products have a European Union approved REACH certificate, which shows that they do not contain any toxic substances. For the Nasiol ZR53 branded product, according to the test results within the scope of LFGB (Lebensmittel-, Bedarfsgegenstände- und Futtermittelgesetzbuch), which is a well-known and respected German food safety standard, it was observed that Nasiol ZR53 does not have a harmful effect on human health when food comes into contact with the surface coated with Nasiol ZR53. In other words, you can safely use our Nasiol ZR53 product on surfaces that come into contact with food.

Nasiol ZR53 is suitable for plastic, metal, painted metal surfaces. It should not be applied to other surfaces.

Our nano coatings consist of nanoscale silicon dioxide particles.

It is recommended to use gloves during product application, which do come with the product. If the product accidentally comes into contact with the skin, wash it off immediately with soap and plenty of water. After contact with skin, take off immediately all contaminated clothing and rinse immediately with plenty of water. If irritation persists after washing, seek medical attention.

Most Nasiol products are solvent-based so they have fragrances in their liquid form. After the products are cured, there is no odor.

Nasiol ZR53 provides protection against fine scratches. In other words, key scratches, scratches caused by pebbles splashing during travel, etc.

Once you have applied the Nasiol ZR53 correctly, there is no need for an additional coat, because considering the first coat on the car, it is unnecessary to apply the second coat as there will be no additional surface left for Nasiol ZR53 to access and bond.

50 ml product bottle, application guide, a pair of gloves, 10 application pads, 1 micro fiber and a polishing cloth, 1 Nasiol glass sticker.

There are 10 products in the case box.

Yes. You can create your own brand. Please contact us for details.

For the full performance of the product, the surface should be kept for 48 hours.