500mL / Durability up to 1 Season
FabricCoat Marine provides extreme protection for all types of fabrics against common liquids, stains, salt water, mold, and bacteria. Its super durable and water-resistant features are perfect for wet weather cloths, awnings, and marine interior fabrics.
Many boats have uncomfortable and inferior plastic and synthetic fabric blends designed to be challenging for boating conditions. Sun and sea is a harsh combination against fabrics. But you don’t have to bear with tough and rough fabrics anymore. Upholster for comfort! MarineTex, water repellent spray, protects the fabric parts of your boat – seats, ropes, tents– from water and stain, preserving their color and extending their lifetime.
FabricCoat Marine can be applied to marine textile seats, ropes, tents, and other fabric surfaces. Do not use it on surfaces other than fabric, like leather, glass, and wood. If wrongly used, wipe the surface with a dry microfiber cloth
Surfaces should be dry and free of any dust, stain, wax, oil, grease and other contamination. Application should be made in a shaded and well-ventilated area. Shake product gently before use. The product is sprayed approximately 80-100 mL for a 1m . Spray with a standard Nasiol FabricCoat Marine bottle till the surface becomes slightly wet. Surfaces which do not absorb product should be spread with a cloth slightly. Wait for 24 hours for drying and curing period. Product effectiveness may change according to fabric type. Make a spot test on hidden part of your fabric.
| Packaging | 500 mL |
| Durability | Up to 6 Months |
| Chemical Resistance | 11>pH>1 |
| Dry Film Thickness | 75-100 nm |
| Consumption per Unit Area | 80-100 ml/m2 |
| Density @23°C | 0.809 g/cm3 |
| pH Value | 2 |
| Breathability (EN 1062-1) | Category 1 |
| Application Temperature | 5°C-30°C ( 50% RH) |
| Temperature Durability | 110°C |
| Water Repellency (ISO-4920) | 100/100 |
| Water Contact Angle | 144° @10 μL |
| Water Contact Angle After “2000 Wet Scrub (ISO-11998:2006) | 126° @10 μL |
| Water Sliding Angle | 7° @20 μL |
| Oil Contact Angle | 92° @10 μL |
| Dry-to-Touch Time | 6h |
| REACH Compliance | Yes |
