Nasiol nano ceramic coatings extend the life of car’s paintwork, provide protection against scratches and remove the most stubborn stains such as bird poop etching from the car easily thanks to its water and oil repellent characteristic. Besides, they preserve your car’s body against adverse effects of sunlight, acid rains and chemicals.

Nasiol PPFGuard is a protection product which is applied onto paint protection films (PPF). Also known as nano ceramic coating, this product makes the surface resistant against scratches and remove tenacious stains such as bird poop easily as it is water and oil repellent. By providing UV protection, it prevents PPFs from fading in course of time. It protects your vehicle for 1.5 years, making it appear just like the first day.

It may be applied to the body, headlights/tail lights, wheel rims and chrome parts of the car.

It provides resistance up to 1.5 years.

An application of single coat is sufficient for durability. Approximate consumption is given below by class of the passenger cars:

Small Car: 20-30 mL (classes A-B)

Standard Car: 30-40 mL (classes C-D)

Big Car: 40-50 mL (classes E-SUV)

It is recommended to have it performed by professionals. But you also may apply it by reading the instructions on application.

Nasiol PPFGuard is applied in two coats. Wait for 60 minutes after completion of the first coat and then apply the second coat.

If you did not use the product completely after its bottle is opened, you may store it for 1 month by making sure it is tightly closed. If the bottle is not opened at all, it may be stored for 2 years under appropriate storage conditions.

Unlike the other products, Nasiol PPFGuard is applied on the paint protection films (PPF). While Nasiol PPFGuard provides durability up to 1.5 years, Nasiol NL272 up to 5 years, Nasiol ZR53 up to 3 years, Nasiol XR03 up to 1.5 years, Nasiol NeoCoatX up to 6months (one coat). Resistance of the products against scratch and environmental factors are different from each other.

Nasiol has not an official application centre yet. As we only supply the product and the application method of the product is essential for getting the desired durability and effect, such warranty or certificate can be given by an organization that applies it.

To get the best performance out of the product, make sure the temperature and relative humidity values (23°C and 50 RH) of the application surface are close as possible to the recommended conditions. Avoid direct sunlight during application and work on cool surfaces only. Wash your car thoroughly. If PPF surface allows, you may, if required, perform polishing by using silicon-free products. Dry the car thoroughly to prevent water drops on the surface during application. Remove dust and dirt on the surface with Nasiol Clean prior to application. Make sure the surface is completely dry. Isolate the application area visually or with masking tape. Do not work on an area larger than 1m ²at a time. Shake the bottle gently before use. Open the lid carefully. Place the suede cloth on the application apparatus and pour appropriate amount of product (2-3 mL/1m² ) on the cloth. Close the bottle again to prevent contact with air during application. Spread the product by using the suede cloth with horizontal and vertical movements. Wipe off the excess product on the surface carefully within 30-60 seconds by using the microfiber that comes with the product and perform the polishing with circular movements by using the same cloth. You may use extra lighting system to make sure there is not product remnants left on the surface. Wait for 60 minutes after the application of the first coat and then repeat the same steps for the second coat. Keep the coated surface away from direct sunlight, dust, water and any dirt throughout the curing process. Do not wash the surface with shampoo or detergent in the first 48 hours. You may take out the car 24 hours after the application.

Before application, make sure the vehicle is clean and dry. Perform the application in a shady place.

• Scratch resistance
• Water and oil repellence
• UV protection
• Chemical resistance
• Protection against exterior effects
• Easy to clean

Our prices vary depending on retail and wholesale. You may contact with us at our e-mail address of phone numbers to get information about our retail and wholesale prices. And you may also visit our online store at shop.nasiol.com or online shopping websites for information about retail price.

We have toxicity certificates and MSDS documents evidencing that our products are not harmful to human health and environment. You may contact with our sales team and review these documents.

You may take advantage of our box-free trademark offer for Nasiol PPFGuard and you may make selections from the catalogue we have to this end and thus create your own trademark.

Nasiol PPFGuard is appropriate for Paint Protection Film (PPF): Polyurethane (PU) – Matt and Transparent Film, High Quality PVC Film, Vinyl Film surfaces. It should not be applied to other surfaces.

Our Nano coatings contain nano-sized silicon dioxide and other chemical particles.

You are recommended to use gloves during application. If it contacts with your skin inadvertently, wash it immediately with plenty of water and soap. After it contacts with your skin, remove all your contaminated clothes immediately and wash them immediately with plenty of water. If sensitization persists on, consult medical aid.

Most of the Nasiol products are solvent-based and they, therefore, smell in liquid form. They are odour-free when and cured on the surface.