Nano Ceramic Coating
Nasiol NeoCoatX is an easy applicable nano ceramic coating that combines ultimate NASIOL technology with userfriendly traditional coating methods.
Naisol NeoCoatX applied to your car ensures a protective layer against UV rays, strong chemicals, bird droppings and road salt. It delivers long-lasting, high hydrophobic traits, along with deep shine that awakens the paint color.
Nasiol NeoCoatX is applicable to car paint work, headlights, taillights, rims and chrome parts. Do not apply to unlacquered plastic parts, fresh paint jobs (up to 3 months), lowquality paint jobs, glass, textile, and tires.
Avoid direct sunlight during the application and only work on cool surfaces. Wash your vehicle thoroughly. Prepare the surface by using Nasiol Clean to improve the bonding performance of the nano coating. Do not work on areas larger than 1 m² per session.
Place a suede cloth onto the applicator block’s sponge surface. Change the suede cloth every 3-4 panels. Shake the product gently before use. Open the lid and pour the necessary amount of product onto the suede cloth. 2-3 mL is enough for 1 m² area. Do not forget to keep the lid closed during the application. Spread the product gently over the surface in a crisscross motion. Once beading occurs (it takes 2-3 minutes in normal conditions), gently wipe the excess product off from the surface using the Nasiol microfiber cloth in linear motions. To make the most of microfiber cloths, fold each one four times before application and do not re-use the side of the cloth you used. After wiping the surface with the microfiber cloth, complete the final buffing process by gently using the Nasiol microfiber cloth in circular motions. If desired, after waiting for 1 hour, a second layer can be applied.
Keep the coated surfaces away from direct sunlight, the elements, various types of contamination, and water exposure for 24 hours. Please wait 48 hours for the nano coating to cure and become resistant to abrasion and chemicals, before any detergent-based washing.
High Chemical Resistance
Easy to Apply
Nasiol nano ceramic coatings extend the life of car’s paintwork or paint protection films (PPF), provide protection against scratches and remove the most stubborn stains such as bird poop etching from the car easily thanks to its water and oil repellent characteristic. Besides, they preserve your car’s body against adverse effects of sunlight, acid rains and chemicals.
Nasiol NeoCoatX is a paint protection product which is applied to exterior surfaces of air and road vehicles. Also known as nano ceramic coating, this product makes the surface resistant against scratches and remove tenacious stains easily as it is water and oil repellent. And it protects the vehicle’s paintwork by providing UV protection. It protects your vehicle for 6 months (in one coat) and 12 months (in two coats), making it appear just like the first day.
It may be applied to the body, headlights/tail lights, wheel rims and chrome parts of the car.
It provides durability up to 6 months (in one coat) and up to 12 months (in two coats).
One coat is sufficient for durability. You may cover 5 cars with one bottle in one coat. Preferably, you may apply a 2nd coat on the car. Approximate consumption (for one coat) is given below by class of the passenger cars:
Small Car: 10-15 mL (classes A-B)
Standard Car: 15-20 mL (classes C-D)
Big Car: 20-25 mL (classes E-SUV)
To get the best performance out of the product, make sure the temperature and relative humidity (RH) values of the application surface are close as possible to the recommended conditions (+5°C / + 30°C/ 41 F / 86 ‘F – 50% RH). Avoid direct sunlight during application and work on cool surfaces only. Wash your car thoroughly. Apply clay bar, if required. After cleaning, apply polishing paste for removing scratches depending on physical condition of your car’s surface. Upon completion of the polishing process and before use of NeoCoatX, was the car again and make sure all application areas are completely dry. Treat the surface with Nasiol Clean prior to using the product and wipe it dry with a lint-free microfiber cloth.
Put the Nasiol suede cloth on the sponge side of the application apparatus. Shake the bottle gently before use. Open the lid and pour sufficient amount of product on the suede cloth. 2-3 mL would suffice for an area of 1m2. After you use the suede cloth on 3-4 panels, dispose of or replace the suede cloth. Do not work on an area larger than 1m2 at a time. Spread the product gently over the surface by smooth movements. When flashing occurs (up to 1 minute under normal conditions), gently wipe the excess product off the surface with linear movements by using Nasiol microfiber cloth. After wiping the surface, complete the final polishing process again by using Nasiol microfiber cloth with circular movements. Optionally, you may apply a 2nd coat after waiting for 1 hour. Keep the coated surface away from direct sunlight, dust, water, dirt and chemicals for a curing period of 24 hours. Before washing by using a detergent-based cleaning product, please wait for 48 hours in order that nano coating gets dry thoroughly and becomes resistant to chemicals.
Before application, make sure the vehicle is clean and dry. Perform the application in a shady place.
In case of newly painted surfaces, the product should not be used within 3 months after the painting. The reason is that the product has much better performance to adhere to the completely dry paint. When the paint is not dry completely, the surface loses its full resolute (stable) character for adhesion of our coating products.
Water and oil repellence
Protection against exterior effects
Easy to clean
When applied wrongly without giving due attention to the application instructions, the product can be removed from the surface only by polishing or sanding process.
Our prices vary depending on retail and wholesale. You may contact with us at our e-mail address of phone numbers to get information about our retail and wholesale prices. And you may also visit our online store at ekspermarket.com or online shopping websites for information about retail price.
We have toxicity certificates and MSDS documents evidencing that our products are not harmful to human health and environment. You may contact with our sales team and review these documents.
You can apply it easily by reading the instructions on application.
Optionally, you may apply Nasiol NeoCoatX in one coat or in two coats. It provides durability up to 6 months in one coat and up to 1 year in 2 coats.
No, it is not applied on Paint Protection Film (PPF).
If you did not use the product completely after its bottle is opened, you may store it for 1 month by making sure it is tightly closed. If the bottle is not opened at all, it may be stored for 1 year under appropriate storage conditions.
Nasiol NL272, Nasiol ZR53, Nasiol XR03 and Nasiol NeoCoatX are paint protection products for vehicles such as cars and yachts. NeoCoatX has two different characteristics. Firstly, it is easy to apply because the flashing time is 2-3 minutes. Secondly, it may be applied in one coat or in two coats. It provides durability up to 6 months in one coat and up to 1 year in two coats.
Both Nasiol MetalCoat F2 and Nasiol NeoCoatX are paint protection products for vehicles such as cars and yachts. While MetalCoat F2 is applied by spraying, Nasiol NeoCoatX is applied by spreading. Besides, Nasiol MetalCoat F2 is applied by spray and wiped immediately, Nasiol NeoCoatX is wiped only after waiting for 2-3 minutes after it is applied.
Nasiol has not an official application centre yet. As we only supply the product and the application method of the product is essential for getting the desired durability and effect, such warranty or certificate can be given by an organization that applies it.
You may take advantage of our box-free trademark offer for Nasiol NeoCoatX and you may make selections from the catalogue we have to this end and thus create your own trademark.
Nasiol NeoCoatX is for plastic, metal and painted metal surfaces. It should not be applied to other surfaces.
Our Nano coatings contain nano-sized silicon dioxide and other chemical particles.
You are recommended to use gloves during application. If it contacts with your skin inadvertently, wash it immediately with plenty of water and soap. After it contacts with your skin, remove all your contaminated clothes immediately and wash them immediately with plenty of water. If sensitization persists on, consult medical aid.
Most of the Nasiol products are solvent-based and they, therefore, smell in liquid form. They are odour-free when and cured on the surface.
Nasiol NeoCoatX provides protection against little scratches and dents caused by key and pebble etc.
Preferably, you may apply Nasiol NeoCoatX in one coat or in two coats. It provides durability up to 6 months in one coat and up to 1 year in 2 coats.
There is 100 mL NeoCoatX bottle of product in the box.
There are 16 products in one cartoon of Nasiol NeoCoatX.
You should allow it for 48 hours on the surface for get full performance out of the product.
Yes. You may take advantage of our box-free trademark offer for Nasiol NeoCoatX; you may make selections from the catalogue we have to this end and thus create your own trademark.